FAQS

WILL THIS WORK WITH MY QUICK ATTACH?

Yes the bucket brackets to hook to your tractor's FEL are both JDQA and SSQA compatible.  If you don't have either, we can ship you brackets without mating hardware so you can weld on your own.

WHAT ARE THE DIMENSIONS AND SPECS OF THE BUCKET?

59.5" L X 25" H X 26.5" W (avg. width)
0.84 cu. yds.
159 LBS Empty
3/16" Solid aluminum sides with 1/8" Plate Steel mating brackets and stainless steel hardware to bolt it all together.

THIS IS A VERY LARGE BUCKET, IS IT SAFE TO USE?

The length of the bucket acts as a stabilizing ballast and dramatically reduces the tractor's tendency to tip left and right.  Assuming adequate ballast weight on the rear is used to counter the load, this bucket is much safer for hauling large volume of light-weight materials than your factory bucket.

WHAT IS THIS DESIGNED TO DO EXACTLY?

This is a light-weight, high volume bucket that is designed to move large volumes of lighter weight materials around your property.  It's not intended to be a used for shoveling, digging or grading. It's for moving lighter materials such as mulch, fertilizer, seed, manure and shavings, construction debris etc.

HOW DO YOU TYPICALLY LOAD THIS BUCKET WITH MATERIAL?

The best way to load this bucket is to leverage your Quick Attach system and your smaller bucket to fill this bucket, then swap out the smaller bucket with the BB.  We typically have found it takes about 60-90 seconds to drop one bucket and pickup up the other, and isn't this exactly why we paid for that QA system?

HOW IS THIS SHIPPED AND ASSEMBLED?

The Bottomless Bucket comes in two parcel shipments disassembled.  Assembly instructions are available on the web-site and assembly typically takes 60-90 minutes and only requires a pair of 9/16" socket and open-end wrench to complete the installation, along with some anti-seize paste to dress the bolts.